• 0 رای - 0 میانگین
  • 1
  • 2
  • 3
  • 4
  • 5
Calculation and Design of Fieldbus Segments with the SIMATIC Fieldbus Calculator
#1
Task
SIMATIC PCS 7 is based on a consistent architecture. This architecture enables the integration of devices using different types of communication.
Apart from the conventional the 4 - 20 mA communication scheme (optionally with HART protocol), the fieldbuses PROFIBUS PA and FOUNDATION Fieldbus H1 are also widely used in the area of process automation.
The successful planning of fieldbus segments requires to find an optimum combination with regard to the area of application, quantity framework and topology. Furthermore, the physical and system-specific requirements and restrictions (number of devices, length of lines, topology) must be taken into account.
Solution
The SIMATIC Fieldbus Calculator assists the user in the planning and laying out of fieldbus segments.
[عکس: 53842953_SIMATIC_Fieldbus_Calculator_e.png]
Figure 01: Application example of the SIMATIC Fieldbus Calculator
The relevant physical data (line lengths, basic current of the devices, topology, etc.) for each fieldbus segment are entered. Based on the defined configuration, the SIMATIC Fieldbus Calculator then calculates the electrical values and issues a warning, if limits are violated.
The solution presented here offers the following advantages:

Free use of the tool on several computers where Microsoft Office Excel is installed.
Flexible planning of the fieldbus segments through the modification of line lengths and shifting of field devices.
Information if the electrical values exceed the defined limits.
The existing configurations can be checked and expanded, if required.

Validity
The SIMATIC Fieldbus Calculator is used for the calculation of fieldbus segments which are supplied with power by a fieldbus coupler and equipped with AFD (Active Field Distributor) and AFDiS (Active Field Distributor intrinsic Safety). The following types of fieldbus couplers can be used:

DP/PA coupler, order number 6ES7157-0AC83-0XA0 and
Field device coupler FDC 157, order number 6ES7157-0AC84-0XA0

Downloads


Content of the Downloads
Download

Documentation
Calculation and Design of Fieldbus Segments with the SIMATIC Fieldbus Calculator[عکس: Acrobat.jpg]

Zip file
SIMATIC Fieldbus Calculator Excel Application [عکس: Zip.jpg]
Last modification
First issue
Additional keywords
PA, FF, fieldbus trunk, fieldbus segment, quantity framework, DP/PA link, PA ring, bus length, termination, field device, Redundancy, Stub length, Active Field Distributors, FF coupler
پاسخ


Digg   Delicious   Reddit   Facebook   Twitter   StumbleUpon  


کاربران در حال بازدید این موضوع:
1 مهمان


کلیه حقوق این وب سایت محفوظ و متعلق به قشم ولتاژ می باشد. طراحی و اجرا توسط