• 0 رای - 0 میانگین
  • 1
  • 2
  • 3
  • 4
  • 5
How can you update the hardware catalog in STEP 7 (TIA Portal) V11?
#1
Instructions
STEP 7 (TIA Portal) V11 provides the option of updating your hardware catalog. Entry ID: 54164095includes downloads for extending the hardware catalog of your STEP 7 (TIA Portal) V11 installation. The downloads contain the software components (Support Packages) needed for the modules and can be transferred to a PC with STEP 7 Professional V11 or STEP 7 Basic V11 using a memory stick, for example.
Please go to Entry ID 54164095 for downloading the Support Packages. The following table describes you how you can use the download of the Support Packages (HSPs) to update your hardware catalog.


No. Procedure
1
Preparation
Open the entry mentioned and click the relevant download symbol. Unpack the *.zip file and copy the enclosed *.isp11 files into a directory to which you have access with STEP 7 V11 Basic or Professional.
Note
Pay attention to the software requirements of each Support Package (for example "for STEP 7 Professional V11+SP1" means that at least STEP 7 Professional V11 SP1 or a higher Service Pack of version V11 must be installed).

2 Open the TIA Portal V11 and switch to Project View.
3 Use the "Tools > Support Packages" menu command to open the "Detailed information" dialog. When this dialog opens, the "Support Package Installation" tab is selected by default and the Support Packages already installed are shown in the right window.
4 Click the "Add from file system" button and navigate to the directory in which you have stored the downloaded *.isp11 files.
5 Select the required *.isp11 file.
[IMG]
Fig. 01
In this example we have selected the *.isp11 file of the HSP0011.

6 The HSP file for the installation is now displayed in the "Detailed information" dialog. The "Installed" column still indicates "No" for this HSP. Select the HSP file as shown in Fig. 02 and click on the "Install" button.
[IMG]
Fig. 02

7 If a message is displayed as shown in Fig. 03, close all the windows of the TIA portal except the Installation window (Fig. 03). The "Continue" button is then enabled. Click "Continue" to start the installation.
[IMG]
Fig. 03

8 You get a message when installation has been completed successfully. Click the "Finish" button. Now your hardware catalog in TIA Portal V11 is up to date. If you reopen the "Detailed information" dialog in the TIA Portal, the "Installed" column now indicates "Yes" for the HSP file.
Creation environment
The pictures in this FAQ were created with STEP 7 V11+SP1.
Additional Keywords
HSP file, Module catalog, Hardware configuration, Hardware update, Hardware configuration, Upgrade
پاسخ


Digg   Delicious   Reddit   Facebook   Twitter   StumbleUpon  


کاربران در حال بازدید این موضوع:
1 مهمان


کلیه حقوق این وب سایت محفوظ و متعلق به قشم ولتاژ می باشد. طراحی و اجرا توسط