• 0 رای - 0 میانگین
  • 1
  • 2
  • 3
  • 4
  • 5
Operating System Updates for IM151-3PN (6ES7151-3..23-0AB0)
#1
DESCRIPTION:
When updating the operating system, you should always update to the latest version available for the order number concerned in each case. The previous versions of the operating system are intended only as a backup, permitting you to downgrade again to the original version, although as far as we are aware this has never been necessary.
The latest version of the operating system is valid for all product releases of this order number.
Requirements for creating an operating system update card:
•Micro Memory Card 2 MB (order no. 6ES7 953-8LL20-0AA0) or larger
•STEP 7 V5.3 incl. Service Pack 1 or higher
•Programming device, e.g. SIMATIC Field PG, or PC with external PROM programmer 6ES7 792-0AA00-0XA0
Transferring the update files to a SIMATIC Micro Memory Card:
1.Create a new directory with the Windows Exporer.
2.Download the required update file from the Internet to this directory.
3.Unpack the update file to this directory. You will now have three files ending with UPD.
4.Insert a SIMATIC Micro Memory Card (≥ 2 MB) into the PG or external PROM programmer.
5.Delete the SIMATIC Micro Memory Card in SIMATIC Manager with the command "File > S7-Memory-Card > Delete".
6.In SIMATIC Manager select the command "Target system > Update operating system".
7.In the displayed dialog box earmark the directory with the UPD files.
8.Double-click one of the UPD files: The SIMATIC Micro Memory Card will be programmed.
The update files are now on the SIMATIC Micro Memory Card.

To update the firmware:
1.Switch off the power to the IM151-3 PN and insert the SIMATIC Micro Memory Card with the firmware update into the receptacle.
2.Switch the power to the IM151-3 PN on again.
The IM151-3 PN will automatically identify the SIMATIC Micro Memory Card with the firmware update and start updating the module. During the firmware update process the SF and BF LEDs will be lit, the ON LED is off. After completion of the update the BF LED will blink with 0.5 Hz.
3.Switch off the power to the IM151-3 PN and remove the SIMATIC Micro Memory Card with the firmware update.
4.Insert the SIMATIC Micro Memory Card with the device name and switch the power on again.

The IM151-3 PN will start up with the new firmware and is then ready for operation.
پاسخ


Digg   Delicious   Reddit   Facebook   Twitter   StumbleUpon  


کاربران در حال بازدید این موضوع:
1 مهمان


کلیه حقوق این وب سایت محفوظ و متعلق به قشم ولتاژ می باشد. طراحی و اجرا توسط