• 0 رای - 0 میانگین
  • 1
  • 2
  • 3
  • 4
  • 5
Delivery stop SINUMERIK 840D sl CNC software 2.7 SP3 / 4.4 SP3 / 4.5 SP1
#1
An error in conjunction with Advanced Surface has been identified in SINUMERIK 840D sl CNC software 2.7 SP3, SW 4.4 SP3 and 4.5 SP1. As a consequence, delivery has been stopped since November 27, 2012.



When $MC_LOOKAH_FFORM[0-4]=1 is set, under certain circumstances, the acceleration rate and/or velocity can increase.
Customers who received this software should only be informed if the function mentioned above is actually used.
In this case, we recommend the following,
1.for applications with the "Advanced-Surface" function, continue to use 2.7 SP2 HF2 / 4.4 SP2 HF2 or
2.deactivate the Advanced Surface function.
It is not permissible to deliver machines, where this function is activated.
Machines that do not use this function can be delivered with these software releases.
A debug with HF4 in week 51 is available for 2.7 SP3 / 4.4 SP3; for 4.5 SP1, the debug is available with HF... in week 52.
For more detailed information, please contact your local Siemens office.

Entry ID:66679601 Date:2012-12-21
پاسخ


Digg   Delicious   Reddit   Facebook   Twitter   StumbleUpon  


کاربران در حال بازدید این موضوع:
1 مهمان


کلیه حقوق این وب سایت محفوظ و متعلق به قشم ولتاژ می باشد. طراحی و اجرا توسط